Address Conflict Detection Test Tool

Network(s)
EtherNet/IP
Distinctive CIP Services
N/A
Product Category
Developer's Tools

Saved to Favorites



The Address Conflict Detection Test Tool is a developer’s tool that allows vendors of EtherNet/IP products to test and verify that their products comply with IP Address Conflict Detection Tests as defined in the EtherNet/IP Interoperability Test Procedure (PUB 95). The ACD Test Tool has been created to assist and help product developers run the IP Address Conflict Detection Tests defined within EtherNet/IP Interoperability Test Procedure.

The Address Conflict Detection Test Tool is a developer tool that is provided for free by HMS, as is, without technical support.

The current version of Address Conflict Detection Test Tool is v.1.14.0.1.

ODVA's Warranty Disclaimer Statement
The right to make, use, or sell product or system implementations based upon the Common Industrial Protocol (CIP) is granted only under separate license pursuant to a Terms of Usage Agreement or other agreement. The ODVA Terms of Usage Agreement is available, at standard charges, over the Internet at www.odva.org. NOTE: Because the technologies described in the CIP Networks Library may be applied in many diverse situations and in conjunction with products and systems from multiple vendors, the user and those responsible for specifying these technologies must determine for themselves their suitability for the intended use. ALL INFORMATION PROVIDED BY ODVA IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND ODVA AND ITS MEMBERS, PARTICIPANTS, SPECIAL INTERESTS GROUPS, EXECUTIVE DIRECTOR AND BOARD OF DIRECTORS EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR OR INTENDED PURPOSE, OR ANY OTHER WARRANTY OTHERWISE ARISING OUT OF THE SPECIFICATIONS. ODVA AND ITS MEMBERS, PARTICIPANTS, SPECIAL INTERESTS GROUPS, EXECUTIVE DIRECTOR AND BOARD OF DIRECTORS DO NOT WARRANT THAT USE OF THE SPECIFICATIONS (INCLUDING, WITHOUT LIMITATION, THE MANUFACTURE, DISTRIBUTION AND SALE OF PRODUCTS THAT COMPLY WITH THE SPECIFICATIONS) WILL BE ROYALTY-FREE. The user should always verify interconnection requirements to and from other equipment, and confirm installation and maintenance requirements for their specific application. IN NO EVENT SHALL ODVA, ITS OFFICERS, DIRECTORS, MEMBERS, AGENTS, LICENSORS, OR AFFILIATES BE LIABLE TO YOU, ANY CUSTOMER, OR THIRD PARTY FOR ANY DAMAGES, DIRECT OR INDIRECT, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DEVELOPMENT EXPENSES, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.

DOWNLOAD


Maximum # Connections Supported
Total CIP
Explicit Messaging: Originator
I/O Messaging: Scanner
I/O Messaging: Target (Adapter)
Explicit Messaging: Target
Device Configuration
Hardware Switches
EDS
EDS File Instance in Device
Parameter Objects
Custom Software
MAC Parameter Configuration: Speed
10 Mbps
100 Mbps
Auto
Manual
MAC Parameter Configuration: Duplex
Half
Full
Auto
Manual
Address Configuration
Hardware Switches
BootP
DHCP
Custom Software
CIP Safety Node
Vendor Specific
Safety Discrete I/O


bookmark Bookmark This Page

Member Gallery Listing From

148

ODVA Technologies Licensed to this Company

EtherNet/IP ID: 90
DeviceNet ID: 90